A clearer understanding. A more practical approach.
EMFPracticalAssess your room ↗
Home / Free tools

FREE TOOLS

Household appliance EMF reference

Typical published ranges for common appliances — search or filter, then measure your own equipment for an accurate reading.

Figures for magnetic-field appliances are typical ranges commonly reported by electric utilities and consumer surveys, not measurements of your specific unit. Actual field strength varies widely by model, age, wiring and load — always confirm with your own meter.
Typical published EMF reference ranges by appliance
ApplianceField type~15 cm / 6 in~60 cm / 2 ftNotes
Electric shaverMagnetic (ELF)4–600 mG0.4–10 mGWide range reflects motor design differences between models.
Hair dryerMagnetic (ELF)1–700 mG0.1–10 mGField drops sharply within the first foot.
Electric blanketMagnetic (ELF)22–39 mGNot separately reportedOlder resistive-wire blankets typically read higher than modern low-EMF designs.
Can openerMagnetic (ELF)500–1,500 mG3–30 mGAmong the highest close-range readings of common small appliances; used briefly.
Electric range / stoveMagnetic (ELF)20–200 mG0.2–9 mGVaries by burner, cookware and power setting.
Microwave ovenMagnetic (ELF)100–300 mG1–30 mGMagnetic-field reading — not a leakage or RF measurement.
Television / monitorMagnetic (ELF)10–80 mG0.1–8 mGOlder CRT models generally read higher than flat panels.
Computer terminal / desktop towerMagnetic (ELF)7–20 mG1–3 mGVaries by internal power supply and proximity to the case.
Wi-Fi routerRadiofrequency (RF)Varies by model and activityMeasure with an RF meterNo comparable published household table exists for RF; strength depends on distance, protocol and data activity.
Mobile phone (in use)Radiofrequency (RF)Varies by signal and activityMeasure with an RF meterOutput power adjusts automatically to signal conditions.
Wireless speaker / smart displayRadiofrequency (RF)Varies by model and activityMeasure with an RF meterTypically intermittent, not continuous, transmission.
Cordless phone base stationRadiofrequency (RF)Varies by modelMeasure with an RF meterSome models transmit continuously even when not in a call — check the manual.

Where these figures come from

Magnetic-field ranges are typical values commonly reported by electric-utility safety pages, which trace back to appliance measurement surveys from the 1990s (the era of the U.S. EPA's "EMF in Your Environment" report). We have not independently re-measured these units. Source example: Liberty Utilities: Understanding Electromagnetic Fields ↗.

RF sources (Wi-Fi, phones, wireless speakers) are shown without specific numbers because no equivalent standardized household survey exists — RF power density depends heavily on distance, protocol and real-time activity. Use our meter selector and an RF-capable meter to measure your own devices.

Estimate a reading at a different distance →